Martha Stewart on Stone Surfaces

The limestone slabs here were treated several ways, proof that a stone’s finish is as important as its color. Finishes can be applied separately or in combination.

Honed stones (1 and 5) have the most natural-looking finish. After the stones are cut, they are sanded with a coarse abrasive to create a smooth, matte surface.

Buffed and distressed stones (2) are first burnished to remove imperfections. Their surfaces are then weathered to create an aged look. The latter process involves tumbling the cut pieces of stone in a cement-mixer-like machine together with smaller stones and water.

Brushed and hammered stones (3 and 4) are first treated with stiff bristles, which give them a moderately rough finish. Hammers similar to pick axes are then used to create a pocked effect.

Satin brushed stones (6 and 7) are treated as brushed ones are, but with softer bristles. This method results in a smoother finish.

Highly polished stones (like onyx) have a glassy look. Fine abrasives smooth the surface in the same manner sandpaper is used on wood.

Marble

Marble starts life as limestone. But under certain conditions, the components of limestone crystallize, creating veins and changing its texture.
What to Know: Marble is softer and more absorbent than granite, but it’s still tough enough for any application in your home. All marble can be polished, though green shades — often called serpentines –can be difficult to polish to a high gloss.
Best For: backsplashes, floors, pastry surfaces, tub surrounds, vanity tops
Care: Clean marble surfaces with water. If necessary, use a mild detergent, and thoroughly rinse afterward. Rust stains are fast to set and hard to remove, so act quickly. Use a poultice (available at flooring stores) to absorb stains. Sealing is an option, but some sealants may darken white pieces, so test a discreet area first.

Granite

Granite, which is available in a broad spectrum of colors, is often flecked with bits of minerals that produce a salt-and-pepper look. In some instances, the minerals form veins.
What to Know: With unmatched durability, granite is hard to scratch and even harder to stain. Domestically mined granite comes from many parts of the country, including Georgia, New Hampshire (the Granite State), and South Dakota.
Best For: kitchen countertops, pastry surfaces, fireplace surrounds
Care: With proper precautions, granite’s luster will not fade over time. Use coasters, cutting boards, and trivets on countertops. Avoid ammonia-based cleaners, which can damage the surface.

Limestone

Limestone, which comes in an array of textures, is frequently formed from the shells of marine animals.
What to Know: The quality and color of limestone vary widely. Hard, dense pieces take a polish; softer ones do not.
Best For: bathroom surfaces, kitchen floors, entryways
Care: Seal as needed; as with most stones, the frequency will depend on how and where it’s used and how it wears.

Onyx

Onyx is distinguished by its translucency. The layered stone often comes from caves.
What to Know: Although we use onyx to describe items that are jet-black, the stone is commonly white or pastel. It can be polished to a very high gloss.
Best For: bathtub surrounds, shower tiles, vanity tops
Care: Be careful; onyx is more prone to scratches than other stones. Seal often.

Slate

Slate is formed from the clay of ancient seabeds.
What to Know: Slate, which often comes in deep greens, blues, grays, and purples, has a matte surface and a distinctive cleft pattern.
Best For: floors, kitchen countertops
Care: Use only neutral, mild alkaline, or specialty cleaners. A low-luster finish, such as honed or distressed, will preserve slate’s matte surface; seal as needed.

Travertine

Travertine has a porous surface, the result of the stone’s forming near hot, mineral-rich bubbling springs.
What to Know: Holes give this stone a spongelike appearance. It can be ordered with them filled for an even surface.
Best For: bathtub surrounds, countertops, shower tiles, floors
Care: If holes are unfilled, be vigilant about wiping up spills, to keep them from pooling in the holes; seal as needed.

Sandstone

Sandstone comprises dense layers of sand for earthy tones.
What to Know: Hardness varies, depending on where the stone is quarried.
Best For: bathtub surrounds, shower tiles and walls, kitchen floors
Care: Seal as needed.

Soapstone

Soapstone gets its soap-like feel from the element talc.
What to Know: It resists high heat.
Best For: kitchen countertops, vanity tops, sinks, fireplace surrounds
Care: Do not seal; rub out scratches with mineral oil or by lightly sanding them.